Add To Your WishlistApplication Mask For In-House Printed Patterned Heat Transfer Vinyl (HTV - Iron on)
Add To Your WishlistApplication Mask For In-House Printed Patterned Heat Transfer Vinyl (HTV - Iron on)
Sorry we're out of stock!
We can let you know when it's available again, just enter your email address below.
- Product Description
Transfer Mask for Pattern Heat Transfer Vinyl (Iron On)
Please Note: The application mask has been updated to a smooth paper backing, rather than the bubbled plastic backing. It is still re-usable - please just ensure you replace it back on to the paper backing (coated side).
Price of these are much cheaper when bought with a 'in-house' pattern.
Insructions on how to use:
Cut your design as normal (Do NOT mirror your design). Use our heat transfer application tape to transfer your design to the garment. Ensure there are no bubbles between the film and the application tape. Set your Heat Press to 140°C - 150°C. Place Teflon sheet or parchment paper between your heat press and design (with HTV application mask still applied). Apply medium pressure for 10 seconds across your design. Carefully remove liner when warm.
This mask is required for enabling the transfer of your design from the (In-House) patterned/printed HTV on to your material.
This is a high tack mask and is reusable up to 5 times.
Please Note: This is only needed if you purchase our in-house printed patterned HTV vinyl you DO NOT need to purchase this for any other HTV we sell.